小火人duro是durometer的缩写，再缩写就是du，这并不是一个硬度单位

虽然官网并不明确，但是其他网站上还是可以看出：101du=101a

再举个例子

ricta官网，clouds系列轮子侧面有印78a的，也有印著seventy eight durometer的所以duro不是硬度单位，a或B才是

Duro不是硬度单位，a，b，d是邵氏硬度单位

引用bones官网的一段话：Shore Durometer A Scale is good, but it does not cover the entire range of skate wheel hardness and is very limited because the scale goes from 1 to 100 and anything over A 95A does not compute accurately.

Shore Durometer B Scale is perfect for skate wheels because:

1. It is very similar to the A Scale, but reads 20 points lower, allowing the useful scale to be extended by 20 points, which covers the entire hardness range of skate wheels in one scale. It uses the same soft spring as the A Gauge, but the conical gauge needle of the D Scale.
2. Because the spring is soft, the B Scale gauge needle does not puncture the skin of the wheel surface, resulting in the same reliable reading as the A Scale does.

Shore Durometer D Scale is designed for hard rubbers and rock hard urethanes, not soft, bouncy urethanes that are used in skate wheels. It has a very stiff spring behind its sharp conical needle and often punctures the skin of the wheel being measured, this resulting in 5-10 points softer reading than is correct. Thus, Shore D Scale should not be used for wheels in the useful skate wheel range.

简单翻译：邵氏A硬度范围一般1~100，超过95a就无法精确测量邵氏B硬度比邵氏A硬度低20个单位，延长部分可以覆盖滑板轮的硬度范围邵氏D硬度不适合滑板轮的硬度计量，不准确其他未翻译内容讲解了不同硬度的硬度计的结构区别，从而解释了为什么滑板轮用A和B单位来计算硬度，而非D邵氏A和D硬度对照参考下表

---

很不错，支架是全球四大品牌支架之一，板面是进口板面，轮子轴承也都是滑手常用配置。

但是，个人更建议你在同一家店买。

看你的描述，应该是一名新手，那就说明，你不太会组装，在同一家店买，对方可以帮你组装好。

或者，你非想分开买的话，可以再单买套桥钉和T字工具，最好问问板面赠不赠砂纸。

---

这价格也太贵了吧，每个part都比我拿到的贵好多。

---

---

大大大大佬。

你这个配置，按照高端玩家起步的啊。

简单来说，新人用不到这个配置。

太奢侈了。虽然你组的真的还不错。

但是要是刚入门，其实可以考虑便宜点。

当然土豪，我个人建议，没问题，就这个，可以玩很久了。

---

这套配置我感觉pro用都够了。。。。

有钱人真好 。。。。

---

挺好 就是有点贵

---

说实话不了解( ??? ? ??。 )我自己只是随便买了个板来玩玩，没仔细做过研究

---

推荐阅读：