我不太想重裝系統耶!是不是系統出的問題?那些什麼IP地址、網關、伺服器什麼的都填好了!我也試過把無線先禁用了,還是不行!我不太想重裝系統啊!


您好,解決了嗎,表示我也是一個受害者


兩片物理網卡全部都認到了,且網路參數配置正確的話,應該是可以上網的才對。但那些未知設備掛在這個地方並且沒有問號圖標,這倒是真的很可疑的

這裡,只能說說排錯思路:

1. 根據這些設備的硬體ID去網上查一下看看是什麼東西。2. 我注意到你的系統中應該有安裝虛擬機,你可以先禁用所有和虛擬機有關的東西,並留意一下網路配置中是否有涉及虛擬機的橋接之類的設置,如有,請恢復到windows的默認狀態。3. 進入安全模式,在「設備管理器」中打開「顯示隱含設備」,刪除所有這些未知設備以及已經不存在了設備,然後重啟進入正常模式,看看windows找到了什麼4. 使用netsh命令,非高手勿濫用


你好,解決了沒有。我的電腦也是這樣。怎麼解決的
這種問題建議百度之,在知乎看到這個問題有種格格不入的感覺
=百度到的http://hi.baidu.com/hongxuelei/item/4588c3f48032c627743c4c83=====謹慎嘗試。=====================================================

the following error message is received when you try to access NIC

properties:

"Some of the controls on this property sheet are disabled because one or more other Network property sheets are already open. To use these controls, close all these property sheets and then reopen this one."

Based on my research, the issue is usually caused by an aborted NIC driver

installation process which leaves a registry value under the following key: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRunOnce I suggest you try the following steps to delete the registry value: 1. Click Start, type regedit in the Start Search box and press Enter. 2. Navigate to the following key: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRunOnce 3. Right click RunOnce and select Export to make a backup. 4. In the right pane, delete the value referenced to rundll32. 5. Quit Registry Editor. Then, restart the computer to test the issue.

========

從題主的圖來看,貌似只有無線網卡可用,還有一個虛擬wi-fi適配器。可以試試到網路鏈接裏,看看本地連接是否可用(叉號圖標),嘗試禁用一下,然後重新啟用。
推薦閱讀:
相關文章